Command Manual – Port Correlation Configuration
H3C S7500E Series Ethernet Switches
Chapter 1 Ethernet Port Configuration
Commands
1-10
z If you provide the all keyword, this command displays the details for all manual
port groups, including their names and the Ethernet ports included.
z Absence of parameters indicates that the names of all port groups will be
displayed.
Examples
# Display the names of all the port groups.
<Sysname> display port-group manual
The following manual port group exist(s):
group1 group2
# Display details of all the manual port groups.
<Sysname> display port-group manual all
Member of group1:
Ethernet2/0/4 Ethernet2/0/6
Member of group2:
None
Table 1-5 Description on the fields of the display port-group manual command
Field Description
The following manual port group exist(s) List of the existing port groups
Member of group Member of the manual port group
1.1.7 display storm-constrain
Syntax
display storm-constrain [ broadcast | multicast ] [ interface interface-type
interface-number ]
View
Any view
Parameters
broadcast: Displays the information about storm constrain for broadcast packets.
multicast: Displays the information about storm constrain for multicast packets.
interface interface-type interface-number: Specifies a port by its number and type. The
storm constrain information about the port will be displayed.
To Next Page
Loading...
Need help?
General
