H3C S7500E Series Command Manual

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches Chapter 3 OSPF Configuration Commands
3-28
If no OSPF process is specified, the retransmission queue information of all OSPF
processes is displayed.
Examples
# Display OSPF retransmission queue information.
<Sysname> display ospf retrans-queue
OSPF Process 1 with Router ID 1.1.1.1
OSPF Retransmit List
The Router's Neighbor is Router ID 2.2.2.2 Address 10.1.1.2
Interface 10.1.1.1 Area 0.0.0.0
Retransmit list:
Type LinkState ID AdvRouter Sequence Age
Router 2.2.2.2 2.2.2.2 80000004 1
Network 12.18.0.1 2.2.2.2 80000003 1
Sum-Net 12.18.1.0 2.2.2.2 80000002 2
Table 3-14 Description on the fields of the display ospf retrans-queue command
Field Description
The Router's Neighbor is Router ID Neighbor router ID
Address Neighbor interface IP address
Interface Interface address of the router
Area Area ID
Retransmit list Retransmission list
Type LSA type
LinkState ID Link state ID
AdvRouter Advertising router
Sequence LSA sequence number
Age LSA age
3.1.22 display ospf routing
Syntax
display ospf [ process-id ] routing [ interface interface-type interface-number ]
[ nexthop nexthop-address ]

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English