Command Manual – System Maintaining and Debugging
H3C S7500E Series Ethernet Switches Chapter 3 Device Management Commands
3-5
Field Description
Actual Stat. Cycle
Actual CPU usage measurement period in ticks,
represented by a 64-bit hexadecimal. CPU Tick High
represents the most significant 32 bits and the CPU
Tick Low the least significant 32 bits. Owing to the
precision of less than one second, the actual
measurement periods of different CPU usage records
may differ slightly.
TaskName Task name
CPU CPU usage of the current task
Runtime(CPU Tick
High/CPU Tick Low)
Running time of the current task
3.1.4 display boot-loader
Syntax
display boot-loader slot slot-number
View
Any view
Parameters
slot slot-number: Displays startup file information of the specified card, where
slot-number represents the slot number of a card. The value range varies with devices.
Description
Use the display boot-loader command to display information of the boot file.
Related commands: boot-loader.
Examples
# Display the file adopted for the current and next boot of a centralized device.
<Sysname> display boot-loader
The primary app to boot of board 1 at this time is: flash:/ Switch.app
The primary app to boot of board 1 at next time is: flash:/ New.app
The slave app to boot of board 1 at next time is: flash:/Switch.app
3.1.5 display device
Syntax
display device [ cf-card ] [ [ shelf shelf-number ] [ frame frame-number ] [ slot
slot-number ] | verbose ]
To Next Page
Loading...
Need help?
General
