H3C S7500E Series Command Manual

Command Manual – Multicast
H3C S7500E Series Ethernet Switches Chapter 5 MSDP Configuration Commands
5-19
5.1.20 reset msdp statistics
Syntax
reset msdp statistics [ peer-address ]
View
User view
Parameters
peer-address: Address of the MSDP peer of which the statistics information is to be
cleared. If you do not provide this argument, the command will clear the statistics
information of all MSDP peers.
Description
Use the reset msdp statistics command to clear the statistics information of the
specified MSDP peer or all MSDP peers without resetting the MSDP peer(s).
Examples
# Clear the statistics information of the MSDP peer 125.10.7.6.
<Sysname> reset msdp statistics 125.10.7.6
5.1.21 shutdown (MSDP View)
Syntax
shutdown peer-address
undo shutdown peer-address
View
MSDP view
Parameters
peer-address: MSDP peer address.
Description
Use the shutdown command to deactivate manually the connection with the specified
MSDP peer.
Use the undo shutdown command to reactivate the connection with the specified
MSDP peer.
By default, the connections with all MSDP peers are active.
Related commands: display msdp peer-status.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English