H3C S7500E Series Command Manual

Command Manual – Multicast
H3C S7500E Series Ethernet Switches Chapter 4 PIM Configuration Commands
4-31
View
PIM view
Parameters
interval: Assert timeout time in seconds, with an effective range of 7 to 2,147,483,647.
Description
Use the holdtime assert command to configure the global value of the assert timeout
time.
Use the undo holdtime assert command to restore the system default.
By default, the assert timeout time is 180 seconds.
This command is effective for both PIM-DM and PIM-SM.
Related commands: holdtime join-prune, pim holdtime join-prune, pim holdtime
assert.
Examples
# Set the global value of the assert timeout time to 100 seconds.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] holdtime assert 100
4.1.30 holdtime join-prune
Syntax
holdtime join-prune interval
undo holdtime join-prune
View
PIM view
Parameters
interval: Join/prune timeout time in seconds, with an effective range of 1 to 65,535.
Description
Use the holdtime join-prune command to configure the global value of the join/prune
timeout time.
Use the undo holdtime join-prune command to restore the system default.
By default, the join/prune timeout time is 210 seconds.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English