H3C S7500E Series

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches Chapter 5 BGP Configuration Commands
5-61
external: Resets all the EBGP connections.
internal: Resets all the IBGP connections.
Description
Use the reset bgp command to reset specified BGP connections.
Examples
# Reset all the BGP connections.
<Sysname> reset bgp all
5.1.73 reset bgp dampening
Syntax
reset bgp dampening [ ip-address [ mask | mask-length ] ]
View
User view
Parameters
ip-address: Destination IP address of a route.
mask: Mask, in dotted decimal notation.
mask-length: Mask length, in the range 0 to 32.
Description
Use the reset bgp dampening command to clear route dampening information and
release suppressed routes.
Related commands: dampening, display bgp routing-table dampened.
Examples
# Clear damping information of route 20.1.0.0/16 and release suppressed route.
<Sysname> reset bgp dampening 20.1.0.0 255.255.0.0
5.1.74 reset bgp flap-info
Syntax
reset bgp flap-info [ regexp as-path-regexp | as-path-acl as-path-acl-number |
ip-address [ mask | mask-length ] ]
View
User view