Command Manual – IP Routing Overview
H3C S7500E Series Ethernet Switches Chapter 1 Routing Overview Commands
1-16
Field Description
deleted Number of routes marked as deleted, which will be freed after a period.
freed Number of routes that got freed, that is, got removed permanently
Total Sums for the numerical items above
1.1.9 display ipv6 relay-route
Syntax
display ipv6 relay-route
View
Any view
Parameters
None
Description
Use the display ipv6 relay-route command to display IPv6 recursive route
information.
Examples
# Display IPv6 recursive route information.
<Sysname> display ipv6 relay-route
Total Number of relay-route is: 1
Dest/Mask: 192::1/64
Related instance id(always 0): 0(1)
Table 1-7 Description on the fields of the display ipv6 relay-route command
Field Description
Total Number of Relay-route Total number of recursive routes
Dest/Mask Destination address/mask of the recursive route
Related instance id(always 0)
IPv6 supports public networks only. Therefore, the
instance ID can be 0 only.
The number in the parentheses after the instance
ID indicates the number of routes that have used
the recursive route in the routing table.
To Next Page
Loading...
Need help?
General
