To Next Page

To Previous Page

Command Manual – Multicast

H3C S7500E Series Ethernet Switches

Chapter 6 Multicast Routing and Forwarding

Configuration Commands

6-2

Multicast boundary information

Boundary Interface

224.1.1.0/24 Vlan1

Table 6-1 Description on the fields of the display multicast boundary command

Field Description

Boundary Multicast group corresponding to the multicast boundary

Interface: Boundary interface corresponding to the multicast boundary

6.1.2 display multicast forwarding-table

Syntax

display multicast forwarding-table [ source-address [ mask { mask | mask-length } ]

| group-address [ mask { mask | mask-length } ] | incoming-interface { interface-type

interface-number | register } | outgoing-interface { { exclude | include | match }

{ interface-type interface-number | register } } | statistics | slot slot-id ] * [ port-info ]

View

Any view

Parameters

source-address: Multicast source address.

group-address: Multicast group address, in the range of 224.0.1.0 to 239.255.255.255.

mask: Mask of the multicast group/source address, 255.255.255.255 by default.

mask-length: Mask length of the multicast group/source address. For a multicast group

address, this argument has an effective value range of 4 to 32; for a multicast source

address, this argument has an effective value range of 0 to 32. The system default is 32

in both cases.

incoming-interface: Displays forwarding entries of which the incoming interface is the

specified one.

outgoing-interface: Displays forwarding entries of which the outgoing interface is the

specified one.

exclude: Displays the routing entries of which the outgoing interface list excludes the

specified interface.

include: Displays the routing entries of which the outgoing interface list includes the

specified interface.

H3C S7500E Series Command Manual

Other manuals for H3C S7500E Series