H3C S7500E Series

Command Manual – DHCP
H3C S7500E Series Ethernet Switches
Chapter 2 DHCP Relay Agent Configuration
Commands
2-1
Chapter 2 DHCP Relay Agent Configuration
Commands
 Note:
z The DHCP relay agent configuration is supported only on VLAN interfaces.
z DHCP Snooping cannot be configured on the DHCP relay agent.
2.1 DHCP Relay Agent Configuration Commands
2.1.1 dhcp enable
Syntax
dhcp enable
undo dhcp enable
View
System view
Parameters
None
Description
Use the dhcp enable command to enable DHCP.
Use the undo dhcp enable command to disable DHCP.
By default, DHCP is disabled.
 Note:
For both DHCP server and relay agent configuration, enabling DHCP first is necessary
to make other configurations take effect.