H3C S7500E Series Command Manual

Command Manual – SNMP-RMON
H3C S7500E Series Ethernet Switches Chapter 1 SNMP Configuration Commands
1-9
1.1.8 display snmp-agent usm-user
Syntax
display snmp-agent usm-user [ engineid engineid | username user-name | group
group-name ] *
View
Any view
Parameters
engineid engineid: Displays SNMPv3 user information for a specified engine ID, where
engineid indicates the SNMP engine ID.
username user-name: Displays SNMPv3 user information for a specified user name. It
is case sensitive.
group group-name: Displays SNMPv3 user information for a specified SNMP group
name. It is case sensitive.
Description
Use the display snmp-agent usm-user command to display SNMPv3 user
information.
Examples
# Display SNMPv3 information for the user aa.
<Sysname> display snmp-agent usm-user username aa
User name: aa
Group name: mygroupv3
Engine ID: 000063A27F000001000071DA
Storage-type: nonVolatile
UserStatus: active
Table 1-5 Descriptions on the fields of the display snmp-agent usm-user command
Field Description
User name SNMP user name
Group name SNMP group name
Engine ID Engine ID for an SNMP entity
Storage-type Storage type
UserStatus SNMP user status

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English