Command Manual – AAA RADIUS HWTACACS
H3C S7500E Series Ethernet Switches
Chapter 1 AAA/RADIUS/HWTACACS
Configuration Commands
1-3
[Sysname] domain system
[Sysname-isp-system] accounting default local
# Configure the default ISP domain system to use RADIUS accounting scheme rd for
all types of users and to use the local accounting scheme as the backup scheme.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] accounting default radius-scheme rd local
1.1.3 accounting lan-access
Syntax
accounting lan-access { local | none | radius-scheme radius-scheme-name
[ local ] }
undo accounting lan-access
View
ISP domain view
Parameters
local: Performs local accounting.
none: Does not perform any accounting.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, which
is a string of 1 to 32 characters.
Description
Use the accounting lan-access command to specify the accounting scheme for LAN
access users.
Use the undo accounting lan-access command to restore the default.
By default, the default accounting scheme is used for LAN access users.
Note that the RADIUS scheme specified for the current ISP domain must have been
configured.
Related commands: accounting default, radius scheme.
Examples
# Configure the default ISP domain system to use the local accounting scheme for
LAN access users.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] accounting lan-access local
To Next Page
Loading...
Need help?
General
