H3C S7500E Series

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches Chapter 5 BGP Configuration Commands
5-22
5.1.22 display bgp routing-table cidr
Syntax
display bgp routing-table cidr
View
Any view
Parameters
None
Description
Use the display bgp routing-table cidr command to display BGP CIDR (Classless
Inter-Domain Routing) routing information.
Examples
# Display BGP CIDR routing information.
<Sysname> display bgp routing-table cidr
BGP Local router ID is 20.20.20.1
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Network NextHop MED LocPrf PrefVal Path/Ogn
*> 40.40.40.0/24 30.30.30.1 0 0 300i
Refer to Table 5-6 for description on the above fields.
5.1.23 display bgp routing-table community
Syntax
display bgp routing-table community [ aa:nn&<1-13> ] [ no-advertise | no-export |
no-export-subconfed ] * [ whole-match ]
View
Any view
Parameters
aa:nn: Community number. Both aa and nn are in the range 0 to 65535.
&<1-13>: Argument before it can be entered up to 13 times.
no-advertise: Displays BGP routes that are not advertised to any peer.