H3C S7500E Series Command Manual

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches Chapter 5 IPv6 BGP Configuration Commands
5-10
Description
Use the display bgp ipv6 network command to display IPv6 routes advertised with
the network command.
Examples
# Display IPv6 routes advertised with the network command.
<Sysname> display bgp ipv6 network
BGP Local Router ID is 1.1.1.2.
Local AS Number is 200.
Network Mask Route-policy Short-cut
2002:: 64
2001:: 64 Short-cut
Table 5-2 Description on the fields of the display bgp ipv6 network command
Field Description
BGP Local Router ID BGP Local Router ID
Local AS Number Local AS Number
Network Network address
Prefix Prefix length
Route-policy Routing policy
Short-cut Shortcut route
5.1.12 display bgp ipv6 paths
Syntax
display bgp ipv6 paths [ as-regular-expression ]
View
Any view
Parameters
as-regular-expression: AS path regular expression.
Description
Use the display bgp ipv6 paths command to display IPv6 BGP path information.
If no parameter is specified, all path information will be displayed.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English