Command Manual – AAA RADIUS HWTACACS
H3C S7500E Series Ethernet Switches
Chapter 1 AAA/RADIUS/HWTACACS
Configuration Commands
1-17
domain isp-name: Specifies all user connections of an ISP domain. The isp-name
argument refers to the name of an existing ISP domain and is a string of 1 to 24
characters.
interface interface-type interface-number: Specifies all user connections of an
interface.
ip ip-address: Specifies a user connection by IP address.
mac mac-address: Specifies a user connection by MAC address. The MAC address
must be in the format of H-H-H.
ucibindex ucib-index: Specifies a user connection by connection index. The value
range is from 0 to 4294967295.
user-name user-name: Specifies a user connection by username.
vlan vlan-id: Specifies all user connections in a VLAN. The VLAN ID ranges from 1 to
4094.
slot slot-number: Specifies the connections on a slot.
Description
Use the cut connection command to tear down the specified connecitons forcibly.
At present, this command applies to only LAN access and portal user connections.
Related commands: display connection, service-type.
Examples
# Tear down all connections in ISP domain aabbcc.net.
<Sysname> system-view
[Sysname] cut connection domain aabbcc.net
1.1.18 display connection
Syntax
display connection [ access-type { dot1x | mac-authentication | portal } | domain
isp-name | interface interface-type interface-number | ip ip-address | mac
mac-address | ucibindex ucib-index | user-name user-name | vlan vlan-id ] [ slot
slot-number ]
View
Any view
Parameters
access-type { dot1x | mac-authentication | portal }: Specifies user connections of an
access mode, that is, 802.1x user connections, MAC authentication user connections,
or portal authentication user connections.
To Next Page
Loading...
Need help?
General
