Command Manual – AAA RADIUS HWTACACS
H3C S7500E Series Ethernet Switches
Chapter 1 AAA/RADIUS/HWTACACS
Configuration Commands
1-18
domain isp-name: Specifies all user connections of an ISP domain. The isp-name
argument refers to the name of an existing ISP domain and is a case-insensitive string
of 1 to 24 characters.
interface interface-type interface-number: Specifies all user connections of an
interface.
ip ip-address: Specifies all user connections using the specified IP address.
mac mac-address: Specifies all user connections using the specified MAC address.
The MAC address must be in the format of H-H-H.
ucibindex ucib-index: Specifies all user connections using the specified connection
index. The value range is from 0 to 4294967295.
user-name user-name: Specifies all user connections using the specified username.
The user-name argument is a case-sensitive string of 1 to 80 characters.
vlan vlan-id: Specifies all user connections in a VLAN. The VLAN ID ranges from 1 to
4094.
slot slot-number: Specifies the connections on a slot.
Description
Use the display connection command to display information about specified or all
AAA user connections.
This command does not apply to FTP user connections.
Related commands: cut connection.
Examples
# Display information about all AAA user connections.
<Sysname> display connection
Index=1 ,Username=telnet@system
IP=10.0.0.1
Total 1 connection(s) matched.
Table 1-1 Description on the fields of the display connection command
Field Description
Index Index number
Username
Username of the connection, in the format
username@domain
IP IP address of the user
Total 1 connection(s) matched. Total number of user connections
To Next Page
Loading...
Need help?
General
