H3C S7500E Series Command Manual

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches
Chapter 2 IPv6 RIPng Configuration
Commands
2-5
Table 2-2 Description on fields of the display ripng database command
Field Description
2001:7B::2:2A1:5DE/64 IPv6 destination address/prefix length
via Next hop IPv6 address
cost Route metric value
Imported Routes learnt from other routing protocols
2.1.5 display ripng interface
Syntax
display ripng process-id interface [ interface-type interface-number ]
View
Any view
Parameters
process-id: RIPng process ID, in the range of 1 to 65535.
interface-type interface-number: Specified an interface.
Description
Use the display ripng interface command to display the interface information of the
RIPng process.
If no interface is specified, information about all interfaces of the RIPng process will be
displayed.
Examples
# Display the interface information of RIPng process 1.
<Sysname> display ripng 1 interface
Interface-name: Vlan-interface 100
Link Local Address: FE80::200:5EFF:FE19:3E00
Split-horizon: on Poison-reverse: off
MetricIn: 0 MetricOut: 1
Default route: off

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English