H3C S7500E Series

Command Manual – File System Management
H3C S7500E Series Ethernet Switches Chapter 1 File System Management Commands
1-17
View
User view
Parameters
.None
Description
Use the reset saved-configuration command to erase the configuration file saved in
the storage device.
Note that:
z The reset saved-configuration command erases the configuration file which has
the main attribute only; while for the configuration file which has both the main and
backup attributes, the command erases its main attribute.
z The reset saved-configuration command erases the configuration file which has
the backup attribute only; while for the configuration file which has both the main
and backup attributes, the command erases its backup attribute.
Caution:
This command will permanently delete the configuration file on the device. Use it with
caution.
Related commands: save, display saved-configuration.
Examples
# Erase the configuration file saved in the storage device.
<Sysname> reset saved-configuration
The saved configuration will be erased.
Are you sure? [Y/N]:y
Configuration in the device is being cleared.
Please wait .......
Configuration in the device is cleared.
1.2.5 restore startup-configuration
Syntax
restore startup-configuration from src-addr src-filename