H3C S7500E Series Command Manual

Command Manual – System Maintaining and Debugging
H3C S7500E Series Ethernet Switches Chapter 1 Basic Configuration Commands
1-13
View
Any view
Parameters
by-linenum: Specifies to display the number of each line.
Description
Use the display this command to display the validated configuration information under
the current view.
After finishing a set of configurations under a view, you can use the display this
command to check whether the configuration takes effect.
Note that:
z A parameter is not displayed if it has the default configuration.
z A parameter is not displayed if the configuration has not taken effect.
z When you use the command under interface view, protocol view or protocol child
view, the command displays the configuration corresponding to the current view.
Examples
# Display configuration information of the current view (the display information varies
with configuration).
<Sysname> system-view
[Sysname] user-interface vty 0
[Sysname-ui-vty0] display this
#
user-interface aux 0
user-interface vty 0
history-command max-size 256
user-interface vty 1 4
#
return
1.1.13 display version
Syntax
display version
View
Any view
Parameters
None

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English