H3C S7500E Series

Command Manual – IP Routing Overview
H3C S7500E Series Ethernet Switches Chapter 1 Routing Overview Commands
1-1
Chapter 1 Routing Overview Commands
 Note:
z The term “router” in this document refers to a Layer 3 switch running routing
protocols.
z Currently, the LSQ1GP12EA board on S7500E series Ethernet switches does not
support IPv6 features.
1.1 Routing Overview Commands
1.1.1 display ip relay-route
Syntax
display ip relay-route
View
Any view
Parameters
None
Description
Use the display ip relay-route command to display the information of recursive
routes.
Examples
# Display recursive route information.
<Sysname> display ip relay-route
Total Number of Relay-route is: 1.
Dest/Mask: 40.40.40.0/255.255.255.0
Related instance id(s): 1(1) 2(1) 3(1) 4(1)