H3C S7500E Series Command Manual

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches Chapter 3 IPv6 OSPFv3 Configuration Commands
3-7
Hello due in 00:00:08
Neighbor Count is 1, Adjacent neighbor count is 1
Table 3-2 Description on the fields of the display ospfv3 interface command
Field Description
Interface ID Interface ID
IPv6 Prefixes IPv6 Prefix
OSPFv3 Process OSPFv3 Process
Area Area ID
Instance ID Instance ID
Router ID Router ID
Network Type Network type of the interface
Cost Cost value of the interface
Transmit Delay Transmission delay of the interface
State Interface state
Priority DR priority of the interface
Designated Router (ID) ID of the designated router on this link
Backup Designated Router (ID)
ID of the backup designated router on
this link
Interface Address Interface address
Timer interval configured, Hello: 10,
Dead: 40, Wait: 40, Retransmit: 5
Time intervals in seconds configured on
the interface, Hello: 10, Dead: 40, Wait:
40, Retransmit: 5
Hello due in 00:00:08 Hello packet will be sent in 8 seconds
Neighbor Count Number of Neighbors on the interface
Adjacent neighbor count Number of Adjacencies on the interface
3.1.7 display ospfv3 lsdb
Syntax
display ospfv3 [ process-id ] lsdb [ [ external | inter-prefix | inter-router |
intra-prefix | link | network | router ] [ link-state-id ] [ originate-router router-id ] |
total ]
View
Any view

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English