H3C S7500E Series Command Manual

Command Manual – QoS
H3C S7500E Series Ethernet Switches Chapter 1 LR Configuration Commands
1-1
Chapter 1 LR Configuration Commands
1.1 LR Configuration Commands
1.1.1 display qos lr interface
Syntax
display qos lr interface [ interface-type interface-number ]
View
Any view
Parameters
interface-type: Port type.
interface-number: Port number.
Description
Use the display qos lr interface command to display the LR configuration information
of a certain interface or all interfaces.
If the interface argument is not specified, this command will display the LR
configuration information of all the interfaces.
Examples
# Display the LR configuration and statistics information of all the interfaces.
<Sysname> display qos lr interface
Interface: Ethernet2/0/10
Direction: Outbound
CIR 64000 (kbps), CBS 4000000 (byte)
Table 1-1 Description on the fields of the display qos lr command
Field Description
Interface Port name, composed of port type and port number
Direction Specify the direction of limited rate as outbound
CIR Committed information rate, in kbps
CBS Committed burst size, in byte

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English