Command Manual – ACL
H3C S7500E Series Ethernet Switches Chapter 1 ACL Configuration Commands
1-9
<Sysname> system-view
[Sysname] acl copy 2008 to 2009
1.2.3 acl name
Syntax
acl name acl-name
View
System view
Parameters
acl-name: Name of the IPv4 ACL, a case insensitive string of 1 to 32 characters. It must
start with an English letter and cannot be the English word of all to avoid confusion.
Description
Use the acl name command to enter the view of an existing IPv4 ACL by specifying its
name.
Examples
# Enter the view of the IPv4 ACL named flow.
<Sysname> system-view
[Sysname] acl name flow
[Sysname-acl-basic-2002-flow]
1.2.4 description (for IPv4)
Syntax
description text
undo description
View
Basic IPv4 ACL view, advanced IPv4 ACL view, Ethernet frame header ACL view
Parameters
text: ACL description, a case-sensitive string of 1 to 127 characters.
Description
Use the description command to create an IPv4 ACL description, to describe the
purpose of the ACL for example.
Use the undo description command to remove the ACL description.
To Next Page
Loading...
Need help?
General
