H3C S7500E Series

Command Manual – IP Addressing and Performance
H3C S7500E Series Ethernet Switches
Chapter 2 IP Performance Configuration
Commands
2-5
Table 2-2 Description on the fields of the display fib statistics command
Field Description
Route Entry Count Number of FIB entries
2.1.4 display icmp statistics
Syntax
display icmp statistics [ slot slot-number ]
View
Any view
Parameters
slot slot-number: Displays the ICMP statistics on a slot.
Description
Use the display icmp statistics command to display ICMP statistics.
Related commands: display ip interface, reset ip statistics.
Examples
# Display ICMP statistics.
<Sysname> display icmp statistics
Input: bad formats 0 bad checksum 0
echo 5 destination unreachable 0
source quench 0 redirects 0
echo reply 10 parameter problem 0
timestamp 0 information request 0
mask requests 0 mask replies 0
time exceeded 0
Output:echo 10 destination unreachable 0
source quench 0 redirects 0
echo reply 5 parameter problem 0
timestamp 0 information reply 0
mask requests 0 mask replies 0
time exceeded 0