To Next Page

To Previous Page

Command Manual – IPv6 Routing

H3C S7500E Series Ethernet Switches Chapter 5 IPv6 BGP Configuration Commands

5-19

Examples

# Display IPv6 BGP routing dampening parameters.

<Sysname> display bgp ipv6 routing-table dampening parameter

Maximum Suppress Time(in second) : 3069

Ceiling Value : 16000

Reuse Value : 750

HalfLife Time(in second) : 900

Suppress-Limit : 2000

Table 5-7 Description on the above fields

Field Description

Maximum Suppress Time Maximum Suppress Time

Ceiling Value Upper limit of penalty value

Reuse Value Reuse Value

HalfLife Time Half life Time

Suppress-Limit Suppress value

5.1.20 display bgp ipv6 routing-table different-origin-as

Syntax

display bgp ipv6 routing-table different-origin-as

View

Any view

Parameters

None

Description

Use the display bgp ipv6 routing-table different-origin-as command to display IPv6

BGP routes originating from different autonomous systems.

Examples

# Display routes from different ASs.

<Sysname> display bgp ipv6 routing-table different-origin-as

BGP Local router ID is 2.2.2.2

Status codes: * - valid, > - best, d - damped,

h - history, i - internal, s - suppressed, S - Stale

H3C S7500E Series Command Manual

Other manuals for H3C S7500E Series