H3C S7500E Series Command Manual

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches Chapter 3 OSPF Configuration Commands
3-10
Field Description
Nexthop Next hop address
RtType Router type: ABR, ASBR
3.1.11 display ospf asbr-summary
Syntax
display ospf [ process-id ] asbr-summary [ ip-address { mask | mask-length } ]
View
Any view
Parameters
process-id: OSPF process ID, in the range 1 to 65535.
ip-address: IP address, in dotted decimal format.
mask: IP address mask, in dotted decimal format.
mask-length: Mask length, in the range 0 to 32 bits.
Description
Use the display ospf asbr-summary command to display information about the
redistributed routes that are summarized.
If no OSPF process is specified, related information of all OSPF processes is
displayed.
If no IP address is specified, information about all summarized redistributed routes will
be displayed.
Related commands: asbr-summary.
Examples
# Display information about all summarized redistributed routes.
<Sysname> display ospf asbr-summary
OSPF Process 1 with Router ID 2.2.2.2
Summary Addresses
Total Summary Address Count: 1
Summary Address

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English