H3C S7500E Series Command Manual

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches Chapter 4 IPv6 IS-IS Configuration Commands
4-1
Chapter 4 IPv6 IS-IS Configuration Commands
4.1 IPv6 IS-IS Configuration Commands
 Note:
z IPv6 IS-IS supports all the features of IPv4 IS-IS except that it advertises IPv6
routing information instead. This document describes only IPv6 IS-IS exclusive
commands. Refer to IS-IS Commands in the part discussing IPv4 routing for other
IS-IS configuration commands.
z At present, the LSQ1GP12EA boards in the S7500E series do not support IPv6.
4.1.1 display isis route ipv6
Syntax
display isis route ipv6 [ [ level-1 | level-2 ] | verbose ]* [ process-id ]
View
Any view
Parameters
verbose: Displays detailed IPv6 IS-IS routing information.
process-id: IS-IS process ID, in the range 1 to 65535.
level-1: Display Level-1 IPv6 IS-IS routes only.
level-2: Displays Level-2 IPv6 IS-IS routes only.
 Note:
If no level is specified, both Level-1 and Level-2 (namely Level-1-2) routing information
will be displayed.
Description
Use the display isis route ipv6 command to display IPv6 IS-IS routing information.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English