H3C S7500E Series Command Manual

Command Manual – DNS
H3C S7500E Series Ethernet Switches Chapter 1 DNS Configuration Commands
1-5
1.1.5 display ip host
Syntax
display ip host
View
Any view
Parameters
None
Description
Use the display ip host command to display the host names and corresponding IP
addresses in the static domain name resolution table.
Examples
# Display the host names and corresponding IP addresses in the static domain name
resolution table.
<Sysname> display ip host
Host Age Flags Address
My 0 static 1.1.1.1
Aa 0 static 2.2.2.4
Table 1-5 Description on fields of the display ip host command
Field Description
Host Host name
Age
Time to live. 0 means that the static mapping will never age out.
You can only manually remove the mappings between host names
and IP addresses.
Flags
Indicates the mapping type, static or dynamic.
Static represents static domain name resolution.
Address Host IP address
1.1.6 dns domain
Syntax
dns domain domain-name
undo dns domain [ domain-name ]

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English