To Next Page

To Previous Page

Command Manual – Multicast

H3C S7500E Series Ethernet Switches Chapter 4 PIM Configuration Commands

4-10

Related commands: c-bsr.

Examples

# Configure VLAN-interface 100 to be a C-RP for multicast groups 225.1.0.0/16 and

226.2.0.0/16, with a priority of 10.

<Sysname> system-view

[Sysname] acl number 2000

[Sysname-acl-basic-2000] rule permit source 225.1.0.0 0.0.255.255

[Sysname-acl-basic-2000] rule permit source 226.2.0.0 0.0.255.255

[Sysname-acl-basic-2000] quit

[Sysname] pim

[Sysname-pim] c-rp vlan-interface 100 group-policy 2000 priority 10

4.1.12 c-rp advertisement-interval

Syntax

c-rp advertisement-interval interval

undo c-rp advertisement-interval

View

PIM view

Parameters

interval: C-RP-Adv interval in seconds, with an effective range of 1 to 65,535.

Description

Use the c-rp advertisement-interval command to configure the interval at which

C-RP-Adv messages are sent.

Use the undo c-rp advertisement-interval command to restore the system default.

By default, the C-RP-Adv interval is 60 seconds.

Related commands: c-rp.

Examples

# Set the global C-RP-Adv interval to 30 seconds.

<Sysname> system-view

[Sysname] pim

[Sysname-pim] c-rp advertisement-interval 30

H3C S7500E Series Command Manual

Other manuals for H3C S7500E Series