H3C S7500E Series

Command Manual – Multicast
H3C S7500E Series Ethernet Switches Chapter 5 MSDP Configuration Commands
5-2
5.1.2 display msdp brief
Syntax
display msdp brief [ state { connect | down | listen | shutdown | up } ]
View
Any view
Parameters
state: Displays the information of MSDP peers in the specified state.
connect: Displays the information of MSDP peers in the connecting state.
down: Displays the information of MSDP peers in the down state.
listen: Displays the information of MSDP peers in the listening state.
shutdown: Displays the information of MSDP peers in the deactivated state.
up: Displays the information of MSDP peers in the in-session state.
Description
Use the display msdp brief command to view the brief information of MSDP peers.
Examples
# View the brief information of MSDP peers in all states.
<Sysname> display msdp brief
MSDP Peer Brief Information
Configured Up Listen Connect Shutdown Down
1 1 0 0 0 0
Peer's Address State Up/Down time AS SA Count Reset Count
20.20.20.20 Up 00:00:13 100 0 0
Table 5-1 Description on the fields of the display msdp brief command
Field Description
Peer's Address MSDP peer address
State
MSDP peer status:
z Up: Session set up; MSDP peer in session
z Listen: Session set up; local device as server, in
listening state
z Connect: Session not set up; local device as client, in
connecting state
z Shutdown: Deactivated
z Down: Connection failed