Command Manual – AAA RADIUS HWTACACS
H3C S7500E Series Ethernet Switches
Chapter 1 AAA/RADIUS/HWTACACS
Configuration Commands
1-45
<Sysname> system-view
[Sysname] radius nas-ip 129.10.10.1
1.2.11 radius scheme
Syntax
radius scheme radius-scheme-name
undo radius scheme radius-scheme-name
View
System view
Parameters
radius-scheme-name: RADIUS scheme name, a case-insensitive string of 1 to 32
characters.
Description
Use the radius scheme command to create a RADIUS scheme and enter RADIUS
scheme view.
Use the undo radius scheme command to delete a RADIUS scheme.
By default, no RADIUS scheme is defined.
Note that:
z The RADIUS protocol is configured scheme by scheme. Every RADIUS scheme
must at least specify the IP addresses and UDP ports of the RADIUS
authentication/authorization/accounting servers and the parameters necessary for
a RADIUS client to interact with the servers.
z A RADIUS scheme can be referenced by more than one ISP domain at the same
time.
z You cannot remove the RADIUS scheme being used by online users with the
undo radius scheme command.
Related commands: key, retry realtime-accounting, timer realtime-accounting,
stop-accounting-buffer enable, retry stop-accounting, server-type, state,
user-name-format, retry, display radius scheme, display radius statistics.
Examples
# Create a RADIUS scheme named radius1 and enter RADIUS scheme view.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1]
To Next Page
Loading...
Need help?
General
