To Next Page

To Previous Page

Command Manual – DHCP

H3C S7500E Series Ethernet Switches Chapter 1 DHCP Server Configuration Commands

1-8

Description

Use the dhcp server relay information enable command to enable the DHCP server

to handle Option 82.

Use the undo dhcp server relay information enable command to configure the

DHCP server to ignore Option 82.

By default, the DHCP server handles Option 82.

Examples

# Configure the DHCP server to ignore Option 82.

<Sysname> system-view

[Sysname] undo dhcp server relay information enable

1.1.11 display dhcp server conflict

Syntax

display dhcp server conflict { all | ip ip-address }

View

Any view

Parameters

all: Displays information about all IP address conflicts.

ip-address: Displays conflict information for the IP address.

Description

Use the display dhcp server conflict command to display information about IP

address conflicts.

Related commands: reset dhcp server conflict.

Examples

# Display information about all IP address conflicts.

<Sysname> display dhcp server conflict all

Address Discover time

4.4.4.1 Apr 25 2007 16:57:20

--- total 1 entry ---

H3C S7500E Series Command Manual

Other manuals for H3C S7500E Series