Command Manual – AAA RADIUS HWTACACS
H3C S7500E Series Ethernet Switches
Chapter 1 AAA/RADIUS/HWTACACS
Configuration Commands
1-20
Self-service = Disable
Default Domain Name: system
Total 2 domain(s)
Table 1-2 Description on the fields of the display domain command
Field Description
Domain Domain name
State Status of the domain (active or block)
Access-limit Access limit (disabled)
Accounting method Accounting method (either required or optional)
Default authentication scheme Default authentication scheme
Default authorization scheme Default authorization scheme
Default accounting scheme Default accounting scheme
Authentication scheme Authentication scheme
Authorization scheme Authentication scheme
Accounting scheme Accounting scheme
Domain User Template Template for users in the domain
Idle-cut Whether idle cut is enabled
Self-service Whether self service is enabled
Total 2 domain(s). 2 ISP domains in total
1.1.20 display local-user
Syntax
display local-user [ idle-cut { disable | enable } | service-type { ftp | lan-access |
ssh | telnet | terminal } | state { active | block } | user-name user-name | vlan vlan-id ]
[ slot slot-number ]
View
Any view
Parameters
idle-cut { disable | enable }: Specifies local users with the idle cut function disabled or
enabled.
service-type: Specifies the local users of a type.
z ftp refers to users using FTP;
To Next Page
Loading...
Need help?
General
