H3C S7500E Series

Command Manual – SSH
H3C S7500E Series Ethernet Switches Chapter 1 SSH Configuration Commands
1-11
<Sysname> system-view
[Sysname] public-key local create rsa
The range of public key size is (512 ~ 2048).
NOTES: If the key modulus is greater than 512,
It may take a few minutes.
Press CTRL+C to abort.
Input the bits in the modulus [default = 1024]:
Generating keys...
........++++++
....................................++++++
.......++++++++
......................++++++++
.
1.1.12 public-key local destroy
Syntax
public-key local destroy rsa
View
System view
Parameters
rsa: RSA key pair.
Description
Use the public-key local destroy command to destroy the local key pair(s).
Related commands: public-key local create.
Examples
# Destroy RSA local key pair.
<Sysname> system-view
[Sysname] public-key local destroy rsa
Warning: Confirm to destroy these keys? [Y/N]:y
1.1.13 public-key local export rsa
Syntax
public-key local export rsa { openssh | ssh1 | ssh2 } [ filename ]
View
System view