H3C S7500E Series Command Manual

Command Manual – IP Routing Overview
H3C S7500E Series Ethernet Switches Chapter 1 Routing Overview Commands
1-24
Description
Use the display ipv6 routing-table statistics command to display routing statistics,
including total route number, added route number and deleted route number.
Examples
# Display routing statistics.
<Sysname> display ipv6 routing-table statistics
Protocol route active added deleted freed
DIRECT 1 1 1 0 0
STATIC 3 0 3 0 0
RIPng 0 0 0 0 0
OSPFv3 0 0 0 0 0
IS-ISv6 0 0 0 0 0
BGP4+ 0 0 0 0 0
Total 4 1 4 0 0
Table 1-10 Description on the fields of the display ipv6 routing-table statistics
command
Field Description
Protocol Routing protocol
route Route number of the protocol
active Active route number
added Routes added after the last startup of the router
deleted Deleted routes, which will be released after a specified time
freed Released (totally removed from the routing table) route number
Total Total route number
1.1.18 display ipv6 routing-table verbose
Syntax
display ipv6 routing-table verbose
View
Any view
Parameters
None

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English