H3C S7500E Series Command Manual

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches Chapter 5 BGP Configuration Commands
5-15
Field Description
Up/Down
The lasting time of a session/the lasting time of
present state (when no session is established)
State State machine of peer
5.1.17 display bgp network
Syntax
display bgp network
View
Any view
Parameters
None
Description
Use the display bgp network command to display routing information that has been
advertised.
Examples
# Display routing information that has been advertised.
<Sysname> display bgp network
BGP Local Router ID is 10.1.4.2.
Local AS Number is 400.
Network Mask Route-policy Short-cut
100.1.2.0 255.255.255.0
100.1.1.0 255.255.255.0 Short-cut
Table 5-3 Description on the fields of the display bgp network command
Field Description
BGP Local Router ID BGP Local Router ID
Local AS Number Local AS Number
Network Network address
Mask Mask

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English