H3C S7500E Series

Command Manual – ARP
H3C S7500E Series Ethernet Switches Chapter 2 Proxy ARP Configuration Commands
2-1
Chapter 2 Proxy ARP Configuration Commands
2.1 Proxy ARP Configuration Commands
2.1.1 proxy-arp enable
Syntax
proxy-arp enable
undo proxy-arp enable
View
VLAN interface view
Parameters
None
Description
Use the proxy-arp enable command to enable proxy ARP.
Use the undo proxy-arp enable command to disable proxy ARP.
By default, proxy ARP is disabled.
Related commands: display proxy-arp.
Examples
# Enable proxy ARP on VLAN-interface 2.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] proxy-arp enable
2.1.2 local-proxy-arp enable
Syntax
local-proxy-arp enable
undo local-proxy-arp enable
View
VLAN interface view