H3C S7500E Series

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches Chapter 3 IPv6 OSPFv3 Configuration Commands
3-17
Field Description
Age Age of LSA
CkSum Checksum
# Display the statistics of OSPFv3 link state request list.
<Sysname> display ospfv3 request-list statistics
OSPFv3 Router with ID (1.1.1.1) (Process 1)
Interface Neighbor LSA-Count
Vlan100 2.2.2.2 0
Table 3-11 Description on the fields of the display ospfv3 request-list statistics
command
Field Description
Interface Interface name
Neighbor Neighbor router ID
LSA-Count Number of LSAs in the request list
3.1.13 display ospfv3 retrans-list
Syntax
display ospfv3 [ process-id ] retrans-list [ { external | inter-prefix | inter-router |
intra-prefix | link | network | router } [ link-state-id ] [ originate-router ip-address ] |
statistics ]
View
Any view
Parameters
process-id: OSPFv3 process ID, in the range 1 to 65535.
external: Displays the AS-external LSA information of the OSPFv3 link state
retransmission list.
inter-prefix: Displays the Inter-area-prefix LSA information of the OSPFv3 link state
retransmission list.
inter-router: Displays the Inter-area-router LSA information of the OSPFv3 link state
retransmission list.