To Next Page

To Previous Page

Command Manual – IPv6 Routing

H3C S7500E Series Ethernet Switches Chapter 3 IPv6 OSPFv3 Configuration Commands

3-18

intra-prefix: Displays the Intra-area-prefix LSA information of the OSPFv3 link state

retransmission list.

link: Displays the Link LSA information of the OSPFv3 link state retransmission list.

network: Displays the Network-LSA information of the OSPFv3 link state

retransmission list.

router: Displays the Router-LSA information of the OSPFv3 link state retransmission

list.

link-state-id: Link state ID, in the format of an IPv4 address.

originate-router ip-address: Specifies the router ID of an advertising router.

statistics: Displays the LSA statistics of the OSPFv3 link state retransmission list.

Description

Use the display ospfv3 retrans-list command to display OSPFv3 link state

retransmission list.

If no process is specified, link state retransmission list information of all OSPFv3

processes is displayed.

Examples

# Display the information of OSPFv3 link state retransmission list.

<Sysname> display ospfv3 retrans-list

OSPFv3 Router with ID (11.1.1.1) (Process 1)

Interface Vlan100 Area-ID 0.0.0.0

--------------------------------------------------------------------------

--------------------------------

Nbr-ID 12.1.1.1

LS-Type LS-ID AdvRouter SeqNum Age CkSum

Link-LSA 0.15.0.24 12.1.1.1 0x80000003 519 0x7823

Router-LSA 0.0.0.0 12.1.1.1 0x80000014 774 0xe5b0

Table 3-12 Description on the fields of the display ospfv3 retrans-list command

Field Description

Interface Interface name

Area-ID Area ID

Nbr-ID Neighbor router ID

LS-Type Type of LSA

LS-ID Link state ID

AdvRouter Advertising Router

H3C S7500E Series Command Manual

Other manuals for H3C S7500E Series