H3C S7500E Series Command Manual

Command Manual – DHCP
H3C S7500E Series Ethernet Switches Chapter 1 DHCP Server Configuration Commands
1-22
View
User view
Parameters
all: Clears the statistics of all IP address conflicts.
ip ip-address: Clears the conflict statistics of a specified IP address.
Description
Use the reset dhcp server conflict command to clear statistics of IP address
conflict(s).
Related commands: display dhcp server conflict.
Examples
# Clears the statistics of all IP address conflicts.
<Sysname> reset dhcp server conflict all
1.1.27 reset dhcp server ip-in-use
Syntax
reset dhcp server ip-in-use { all | ip ip-address | pool [ pool-name ] }
View
User view
Parameters
all: Clears the IP address dynamic binding information of all DHCP address pools.
ip ip-address: Clears the dynamic binding information of a specified IP address.
pool [ pool-name ]: Clears the dynamic binding information of a specified address pool.
The pool name is a string of 1 to 35 characters. If no pool name is specified, the
dynamic binding information of all address pools is cleared.
Description
Use the reset dhcp server ip-in-use command to clear dynamic IP address binding
information.
Related commands: display dhcp server ip-in-use
Examples
# Clear the binding information of IP address 10.110.1.1.
<Sysname> reset dhcp server ip-in-use ip 10.110.1.1

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English