H3C S7500E Series Command Manual

Command Manual – QoS
H3C S7500E Series Ethernet Switches
Chapter 4 Priority Mapping Configuration
Commands
4-1
Chapter 4 Priority Mapping Configuration
Commands
4.1 Priority Mapping Table Configuration Commands
4.1.1 display qos map-table
Syntax
display qos map-table [ dot1p-dp | dot1p-lp | dscp-dot1p | dscp-dp | dscp-dscp ]
View
Any view
Parameters
dot1p-lp: Specifies the 802.1p precedence-to-local precedence mapping table.
dot1p-dp: Specifies the 802.1p precedence-to-drop precedence mapping table.
dscp-dp: Specifies the DSCP-to-drop precedence mapping table.
dscp-dot1p: Specifies the DSCP-to-802.1p precedence mapping table.
dscp-dscp: Specifies the DSCP-to-DSCP mapping table.
Description
Use the display qos map-table command to display the configuration of a priority
mapping table.
If the type of the priority mapping table is not specified, the configuration of all the
priority mapping tables is displayed.
Related commands: qos map-table.
Examples
# Display the configuration of the 802.1p precedence-to-drop precedence mapping
table.
<Sysname> display qos map-table dot1p-dp
MAP-TABLE NAME: dot1p-dp TYPE: pre-define
IMPORT : EXPORT
0 : 2
1 : 2
2 : 2
3 : 1

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English