H3C S7500E Series Command Manual

Command Manual – SNMP-RMON
H3C S7500E Series Ethernet Switches Chapter 1 SNMP Configuration Commands
1-5
Table 1-3 Descriptions on the fields of the display snmp-agent mib-view command
Field Description
View name MIB view name
MIB Subtree MIB subtree corresponding to the MIB view
Subtree mask MIB subtree mask
Storage-type Storage type
View Type
View type, which can be included or excluded
Included indicates that all nodes of the MIB tree are included
in current view.
Excluded indicates that not all nodes of the MIB tree are
included in current view.
View status The status of MIB view
1.1.5 display snmp-agent statistics
Syntax
display snmp-agent statistics
View
Any view
Parameters
None
Description
Use the display snmp-agent statistics command to display SNMP statistics.
Examples
# Display the statistics on the current SNMP.
<Sysname> display snmp-agent statistics
0 Messages delivered to the SNMP entity
0 Messages which were for an unsupported version
0 Messages which used a SNMP community name not known
0 Messages which represented an illegal operation for the community supplied
0 ASN.1 or BER errors in the process of decoding
0 Messages passed from the SNMP entity
0 SNMP PDUs which had badValue error-status
0 SNMP PDUs which had genErr error-status
0 SNMP PDUs which had noSuchName error-status

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English