H3C S7500E Series Command Manual

Command Manual – SSH
H3C S7500E Series Ethernet Switches Chapter 1 SSH Configuration Commands
1-4
Parameters
None
Description
Use the display sftp client source command to display the source IP address or
source interface currently set for the SFTP client.
If neither source IP address nor source interface is specified for the SFTP client, “You
didn’t specify the source” will be displayed.
Related commands: sftp client source.
Examples
# Display the source IP address of the SFTP client.
<Syaname> display sftp client source
The source IP address you specified is 192.168.0.1
1.1.4 display ssh client source
Syntax
display ssh client source
View
Any view
Parameters
None
Description
Use the display ssh client source command to display the source IP address or
source interface currently set for the SSH client.
If neither source IP address nor source interface is specified for the SSH client, “You
didn't specify the source” will be displayed.
Related commands: ssh client source.
Examples
# Display the source IP address of the SSH client.
<Sysname> display ssh client source
The source IP address you specified is 192.168.0.1

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English