H3C S7500E Series Command Manual

Command Manual – MSTP
H3C S7500E Series Ethernet Switches Chapter 1 MSTP Configuration Commands
1-9
Oper Configuration
Format selector :0
Region name :hello
Revision level :0
Instance Vlans Mapped
0 21 to 4094
1 1 to 10
2 11 to 20
Table 1-6 Description on the fields of the display stp region-configuration command
Field Description
Format selector MSTP-defined format selector
Region name MST region name
Revision level Revision level of the MST region
Instance Vlans Mapped VLAN-to-instance mappings in the MST region
1.1.8 display stp root
Syntax
display stp root
View
Any view
Parameters
None
Description
Use the display stp root command to view the root bridge information of all MSTP
instances.
Examples
# View the root bridge information of all MSTP instances.
<Sysname> display stp root
MSTID Root Bridge ID ExtPathCost IntPathCost Root Port
0 0.0013.1923.da80 0 0

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English