Command Manual – Multicast
H3C S7500E Series Ethernet Switches Chapter 5 MSDP Configuration Commands
5-18
View
User view
Parameters
peer-address: Specifies an MSDP peer by its address. If you do not provide this
argument, the TCP connections with all MSDP peers will be reset.
Description
Use the reset msdp peer command to reset the TCP connection with the specified
MSDP peer or the TCP connections with all MSDP peers and clear all the statistics
information of the MSDP peer(s).
Related commands: display msdp peer-status.
Examples
# Reset the TCP connection with the MSDP peer 125.10.7.6 and clear all the statistics
information of this MSDP peer.
<Sysname> reset msdp peer 125.10.7.6
5.1.19 reset msdp sa-cache
Syntax
reset msdp sa-cache [ group-address ]
View
User view
Parameters
group-address: Address of the multicast group related to which the (S, G) entries are to
be cleared from the MSDP cache. The effective range is 224.0.1.0 to 239.255.255.255.
If you do not provide this argument, the command will clear all the cached (S, G)
entries.
Description
Use the reset msdp sa-cache command to clear (S, G) entries from the MSDP cache.
Related commands: cache-sa-enable, display msdp sa-cache.
Examples
# Clear the (S, G) entries related to the multicast group 225.5.4.3 from the MSDP
cache.
<Sysname> reset msdp sa-cache 225.5.4.3
To Next Page
Loading...
Need help?
General
