H3C S7500E Series Command Manual

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches Chapter 4 IS-IS Configuration Commands
4-10
Field Description
DIS Designated IS
SNPA Address Subnet access point address
IP Address Primary IP address
Secondary IP Address(es) Secondary IP addresses
IPV6 Link Local Address IPv6 link local address
IPV6 Global Address(es) IPv6 global address
Csnp Timer Value Interval for sending CSNP packets
Hello Timer Value Interval for sending Hello packets
Hello Multiplier Value Number of invalid Hello packets
Lsp Timer Value Interval for sending LSP packets
Cost Cost
Priority Preference
Retransmit Timer Value
LSP retransmission interval over
point-to-point link
4.1.9 display isis license
Syntax
display isis license
View
Any view
Parameters
None
Description
Use the display isis license command to display the information of the IS-IS license.
Examples
# Display the information of the IS-IS license.
<Sysname> display isis license
ISIS Shell License Values
_________________________

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English