H3C S7500E Series Command Manual

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches Chapter 3 OSPF Configuration Commands
3-18
Field Description
LS UPD: Received less recent
LSA
LSU packets without latest LSA
LS UPD: Unknown LSA type LSU packets with unknown LSA type
3.1.15 display ospf interface
Syntax
display ospf [ process-id ] interface [ all | interface-type interface-number ]
View
Any view
Parameters
process-id: OSPF process ID, in the range 1 to 65535.
all: Display the OSPF information of all interfaces.
interface-type interface-number: Interface type and interface number.
Description
Use the display ospf interface command to display OSPF interface information.
If no OSPF process is specified, the OSPF interface information of all OSPF processes
is displayed.
Examples
# Display OSPF interface information.
<Sysname> display ospf interface
OSPF Process 1 with Router ID 192.168.1.1
Interfaces
Area: 0.0.0.0
IP Address Type State Cost Pri DR BDR
192.168.1.1 PTP P-2-P 1562 1 0.0.0.0 0.0.0.0
Area: 0.0.0.1
IP Address Type State Cost Pri DR BDR
172.16.0.1 Broadcast DR 1 1 172.16.0.1 0.0.0.0

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English