H3C S7500E Series Command Manual

Command Manual – Portal
H3C S7500E Series Ethernet Switches Chapter 1 Portal Configuration Commands
1-9
Field Description
Port Listening port on the portal server
URL Address the packets are to be redirected to
1.1.6 display portal server statistics
Syntax
display portal server statistics { all | interface interface-type interface-number }
View
Any view
Parameters
all: Specifies all interfaces.
interface interface-type interface-number: Specifies an interface by its type and name.
Description
Use the display portal server statistics command to display portal server statistics on
a specified interface or all interfaces.
Note that with the all keyword specified, the command displays portal server statistics
by interface and therefore statistics about a portal server referenced by more than one
interface may be displayed repeatedly.
Examples
# Display portal server statistics on Vlan-interface 2.
<Sysname> display portal server statistics interface Vlan-interface 2
---------------Interface: Vlan-interface 2----------------------
Server name: st
Invalid packets: 0
Pkt-Name Total Discard Checkerr
REQ_CHALLENGE 3 0 0
ACK_CHALLENGE 3 0 0
REQ_AUTH 3 0 0
ACK_AUTH 3 0 0
REQ_LOGOUT 1 0 0
ACK_LOGOUT 1 0 0
AFF_ACK_AUTH 3 0 0
NTF_LOGOUT 1 0 0
REQ_INFO 6 0 0

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English