H3C S7500E Series Command Manual

Command Manual – PoE
H3C S7500E Series Ethernet Switches Chapter 1 PoE Configuration Commands
1-3
View
Any view
Parameters
None
Description
Use the display poe device command to display the mapping between ID, module,
and slot of all the power sourcing equipments (PSEs).
Examples
# Display the mapping between ID, module, and slot of each PSE.
<Sysname> display poe device
PSE ID SlotNo SubSNo PortNum MaxPower(W) State Model
10 3 0 48 100 on LSQ1GV48SC
Table 1-1 Description on the fields of the display poe device command
Field Description
PSE ID ID of the PSE
SlotNo Slot number of the PSE
SubSNo Subslot number of the PSE
PortNum Number of PoE interfaces on the PSE
MaxPower(W) Maximum power of the PSE (W)
State
PSE state:
on: The PSE is supplying power.
off: The PSE stops supplying power.
faulty: The PSE fails.
Model PSE model
1.1.4 display poe interface
Syntax
display poe interface [ interface-type interface-number ]
View
Any view

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English