Command Manual – DHCP
H3C S7500E Series Ethernet Switches Chapter 1 DHCP Server Configuration Commands
1-23
1.1.28 reset dhcp server statistics
Syntax
reset dhcp server statistics
View
User view
Parameters
None
Description
Use the reset dhcp server statistics command to clear the statistics of the DHCP
server.
Related commands: display dhcp server statistics.
Examples
# Clear the statistics of the DHCP server.
<Sysname> reset dhcp server statistics
1.1.29 static-bind client-identifier
Syntax
static-bind client-identifier client-identifier
undo static-bind client-identifier
View
DHCP address pool view
Parameters
client-identifier: The client ID of a static binding, a string with 4 to 160 characters in the
format H-H-H…, each H indicates 4 hex digits except the last H indicates 2 or 4 hex
digits. For example, aabb-cccc-dd is a valid ID, while aabb-c-dddd and aabb-cc-dddd
are both invalid.
Description
Use the static-bind client-identifier command to specify the client ID of a static
binding in a DHCP address pool.
Use the undo static-bind client-identifier command to remove the client ID of a static
binding from a DHCP address pool.
By default, no client ID is specified.
To Next Page
Loading...
Need help?
General
