H3C S7500E Series Command Manual

Command Manual – File System Management
H3C S7500E Series Ethernet Switches Chapter 2 FTP Configuration Commands
2-11
 Note:
The Is command can only display the names of files and directories, whereas the dir
command can display other related information of the files and directories, such as the
size, the date they were created.
Examples
# View the information of the file startup.cfg, and save the result to aa.txt.
[ftp] dir startup.cfg aa.txt
227 Entering Passive Mode (2,2,2,2,4,7).
125 ASCII mode data connection already open, transfer starting for startup.cfg.
....226 Transfer complete.
FTP: 68 byte(s) received in 6.180 second(s), 11.00 byte(s)/sec.
2.2.10 disconnect
Syntax
disconnect
View
FTP client view
Parameters
None
Description
Use the disconnect command to disconnect from the remote FTP server but remain in
FTP client view.
This command is equal to the close command.
Examples
# Disconnect from the remote FTP server but remain in FTP client view.
[ftp] disconnect
221 Server closing.
[ftp]
2.2.11 display ftp client configuration
Syntax
display ftp client configuration

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English